Home › Finding your water meter, stopcock and isolation valves
Guide · Newborough plumbing

Finding your water meter, stopcock and isolation valves

When water is pouring out of a pipe, you do not want to be searching for the shut-off with a torch. Here is where to look in a typical Newborough house.

The water meter

Your water meter measures how much water you use and has a tap that shuts off water to the whole property. In most Newborough streets, the meter is near the front boundary. Look:

  • beside the front fence or gate
  • next to the driveway, often close to the footpath
  • in a small rectangular box set into the lawn or nature strip with a lid
  • standing up on a short pipe beside the house in some older homes

If you cannot find it, check your water bill. Gippsland Water bills sometimes show the meter location, and the meter number on the bill matches the number on the meter itself.

How to turn off the meter

Most meters have a tap with a round handle or a lever.

  • Round handle: turn clockwise until it stops.
  • Lever: turn it so it sits at right angles to the pipe.

Once it is off, turn on a tap inside to check the water stops. It may run for a few seconds as the pipes drain.

Isolation valves inside the house

Isolation valves let you turn off water to one fitting without shutting down the whole house. Look for small valves:

  • under kitchen and bathroom sinks, on the hot and cold pipes
  • behind or beside the toilet, where the water connects to the cistern
  • at the washing machine taps
  • at the cold water inlet of the hot water unit
  • on dishwashers and fridges with water connections

Many older Newborough homes have few or no isolation valves. Adding them when a tap or toilet is being repaired is a small cost that pays off in an emergency.

The hot water cold valve

Your hot water unit has a cold water valve on the inlet pipe, usually with a handle. Turning it off stops more water entering the tank. If the tank is leaking, turning this off and switching off the power is the first thing to do.

Stuck valves

Meter taps and isolation valves that have not been touched for years can seize. If one will not turn by hand, do not force it with a wrench or pipe. You can snap the spindle or crack the valve body and make the leak much worse. Ring 03 8658 7998 and we will replace it.

Test them once a year

Pick a day each year, perhaps when you change your smoke alarm batteries, and turn off the meter and each isolation valve, then turn them back on. That keeps them moving and reminds everyone in the house where they are.

Mark them

Use a paint pen or tag to mark the meter tap and important valves. Write down where they are and keep the note on the fridge or in your phone.

Handy guides

More guides

Burst pipe: what to do in the first ten minutesA step-by-step guide for Newborough households when a pipe bursts: shutting off water, protecting the house, what to tell your plumber and insurer.Frozen pipes in a Latrobe Valley winterHow to protect pipes, taps and hot water relief lines from frost in Newborough and the Latrobe Valley, and what to do if a pipe freezes or splits.Heat pump or electric hot water in the Latrobe Valley?Comparing heat pump, electric storage and solar hot water for Newborough and Latrobe Valley homes: running costs, cold winters, space, noise and rebates.Hot water temperature rules in Victoria, explainedA plain-English guide to hot water temperature rules in Victoria: the 60 degree storage rule, the 50 degree bathroom limit, tempering valves and scald safety.Leaking tap: fix it yourself or call a plumber?How to tell what kind of tap you have, which leaks you can safely fix yourself, and when to call a Newborough plumber instead.No hot water? A quick checklist before you callSimple checks for Newborough households with no hot water: switchboard breakers, off-peak timers, relief valves, tank leaks and when to call a plumber.Plumbing in Newborough's post-war homesWhat to expect from the plumbing in Newborough's original post-war houses: clay sewers, galvanised pipe, old hot water units and what to check when buying or renovating.Stormwater after a storm: what to checkWhat to check around your Newborough home after heavy rain: gutters, downpipes, pits, pooling water and signs your stormwater system is failing.Toilet cistern faults explainedA guide to common toilet cistern faults in Newborough homes: running water, slow filling, weak flushes, leaks and how each is fixed.Tree roots in old clay sewersWhy tree roots get into Newborough's old clay sewer pipes, the warning signs, how roots are cleared and the options for a permanent fix.
Book a plumber

Send us the job details

Send the details and a licensed plumber from Newborough will call you back. Water flooding or a sewer overflowing? Do not wait for a reply, ring 03 8658 7998 now.

03 8658 7998

Every job is quoted on what we actually find. That is why you will not see a price list on this site.







    Plumbing problem in Newborough?

    Ring a local licensed plumber. You hear the price before any work starts.