Home › Burst Pipe Repairs Newborough
Plumber cutting out a split water pipe in a muddy trench in a front yard
Burst pipes · Newborough VIC 3825

Burst Pipe Repairs Newborough

Turn the water off at the meter, then ring 03 8658 7998. We find and repair burst pipes in Newborough homes and yards, then check the rest of the line so it does not happen again.

First, stop the water

If a pipe has burst, every minute counts.

  1. Turn off the main tap at the water meter. It is usually at the front of the property near the boundary. Turn it clockwise until it stops.
  2. If water is near electrical fittings, switch the power off at the switchboard if it is safe to do so.
  3. Move furniture, rugs and valuables out of the way, and put down towels or buckets.
  4. Ring us on 03 8658 7998.

Why pipes burst in Newborough homes

Ageing galvanised pipe

Many houses from the 1950s and 1960s were plumbed with galvanised steel pipe. It corrodes from the inside, narrows and weakens, and eventually splits, often at a threaded joint under the house or in a wall. If you have one galvanised leak, more are likely.

Old copper

Copper is long-lasting, but older copper can develop pinhole leaks, and joints can fail where pipes have been stressed or rubbed against framing.

Poly pipe in the yard

Polyethylene pipe runs from the meter to the house on many properties and to sheds and garden taps. It can be split by a spade, a post-hole digger or tree roots, and old fittings can pull apart.

Frosty mornings

Valley frosts are common through winter. Exposed pipes on the outside of the house, under raised floors and on the roof can freeze, and the ice expands and splits the pipe. The leak often shows up as the ice thaws later in the morning.

High water pressure

Excessive water pressure strains pipes, joints and appliances. A pressure limiting valve can protect the whole house.

Ground movement

Reactive clay soils shrink and swell with the seasons, which can stress underground pipes and joints.

How we repair a burst pipe

We locate the burst, cut out the damaged section and replace it with new copper or approved plastic pipe and fittings. If the pipe is under the floor, we get in through the subfloor access where possible. If it is in a wall, we open the smallest area possible to make the repair.

Once the repair is done, we turn the water back on, check for leaks and bleed air out of the lines. Then we look at the condition of the surrounding pipework and tell you if the rest of the system is likely to cause trouble.

Hidden leaks

Not every burst is obvious. Signs of a hidden leak include:

  • a water bill much higher than usual
  • the water meter dial moving when all taps are off
  • damp patches on walls, ceilings or floors
  • a hissing sound in a wall
  • soggy patches in the lawn or along the driveway
  • low water pressure

If the leak is hidden, we use acoustic and thermal leak detection equipment to pinpoint it before opening anything up.

Repiping

If your house has failing galvanised pipe, replacing the whole run may be better value than repairing one leak after another. We can repipe in stages or all at once, depending on your budget and the condition of the pipe.

Insurance

Many home insurance policies cover water damage from a sudden burst, but not the pipe repair itself. We can provide a written report and photos for your claim.

Protecting pipes from frost

Valley frosts are a regular part of winter. To reduce the risk of frozen pipes:

  • lag exposed pipes on outside walls, under the house and in the roof space with foam pipe insulation
  • protect hot water unit pipework, especially on outdoor units
  • disconnect hoses from garden taps on frosty nights
  • fix dripping outside taps, because a drip can freeze and block the pipe

If a pipe freezes, do not use a naked flame to thaw it. Turn the water off at the meter and let it thaw gradually, or ring us.

Pipe materials compared

Galvanised steel

Common in post-war houses. Corrodes from the inside and is often near the end of its life.

Copper

Long-lasting and still widely used. Can develop pinholes in some water conditions.

Polyethylene and cross-linked polyethylene

Flexible plastic pipes used for underground services and in many newer homes. Durable when correctly installed.

Multilayer pipe

A composite of plastic and aluminium used in some new homes and renovations.

When we repair a burst, we use the material that suits the location and the existing pipework.

Pressure limiting valves

If your mains pressure is high, a pressure limiting valve near the meter reduces stress on every pipe, tap and appliance in the house. It is a small part that can prevent future bursts and is often fitted at the same time as a burst pipe repair.

Where we work

Newborough, Moe, Yallourn North, Hernes Oak, Moe South, Morwell, Traralgon, Trafalgar and Tanjil South.

Included

What you get with burst pipe repairs

On the ute
Drain camera with locator, jetter, electric eel, acoustic leak detector, thermal camera, pressure test gear
Licensing
Victorian licences for water supply, sanitary, drainage and roofing
Quoting
Cause explained and price agreed before work, written quotes for larger jobs
Parts
WaterMark-certified fittings and products that meet Australian Standards
Certificates
Compliance certificates for regulated plumbing work, photos for your records or insurer
Leaving
Old parts removed, the work area cleaned and everything tested with you
Questions

Burst Pipe Repairs in Newborough: questions

What should I do if a pipe bursts?

Turn off the water at the meter straight away, switch off the hot water unit, and keep water away from power points. Then ring 03 8658 7998.

Will insurance pay for a burst pipe?

Many policies cover the resulting water damage but not the cost of fixing the pipe. Check your policy. We can supply a report and photos.

How do I find my water meter?

In most Newborough streets, it is near the front boundary, either in a small box in the ground or standing up beside the fence or driveway.

Can frozen pipes burst?

Yes. Water expands as it freezes, which can split pipes. Lagging exposed pipes helps prevent it.

How long does a burst pipe repair take?

Most accessible bursts are repaired within an hour or two. Pipes inside walls or under slabs take longer because the leak must be located and accessed first.

Should I replace all my galvanised pipe?

If one galvanised section has burst, others are often close behind. Replacing the whole run can be better value than repeated repairs. We look at the pipe and give you options.

Book a plumber

Send us the job details

Send the details and a licensed plumber from Newborough will call you back. Water flooding or a sewer overflowing? Do not wait for a reply, ring 03 8658 7998 now.

03 8658 7998

Every job is quoted on what we actually find. That is why you will not see a price list on this site.







    Why Newborough rings us

    Straight answers and tidy work

    We know valley houses

    Post-war SEC brick and weatherboard homes, 1970s units, new estates on the edge of Newborough and lake-side blocks: we know what is usually hiding in the walls and under the lawn.

    The price comes first

    You get the cause and the cost before work starts. If the plan changes once we open something up, we stop and talk to you first.

    Proper diagnostic gear

    Drain cameras, jetters, acoustic leak detectors and thermal cameras mean we find the fault instead of guessing and digging.

    Plumbing licences

    Water, sanitary, drainage and roofing work done by licensed tradespeople, with the paperwork lodged where the law requires it.

    Service area

    Towns we cover from Newborough

    We work out of Newborough and cover the valley from Moe and Yallourn North across to Morwell and Traralgon, plus the hill blocks around Tanjil South and Moe South. Not on the list? Ring 03 8658 7998 and ask.

    Plumbing problem in Newborough?

    Ring a local licensed plumber. You hear the price before any work starts.