Home › Tree roots in old clay sewers
Guide · Newborough plumbing

Tree roots in old clay sewers

If you live in one of Newborough's older homes and your drains block every year or two, tree roots are the most likely cause. Here is what is going on underground.

Why clay sewers attract roots

When Newborough was built after the Second World War, house sewers were laid with vitrified clay pipe. The pipe itself is tough and long-lasting, but it comes in short lengths, each joined to the next with a socket. Originally those joints were sealed with mortar or a simple seal. Over decades, ground movement, settling and the occasional heavy vehicle open tiny gaps at the joints.

Sewer pipes carry warm, moist, nutrient-rich water, and tree roots are very good at finding it. A hair-thin root finds the gap, grows into the pipe and thrives. Over time, it branches into a dense mat that fills the pipe and catches toilet paper, wipes and food waste until the line blocks.

Trees that cause the most trouble

Almost any tree or large shrub can send roots into a sewer, but some are worse than others. Gums, willows, poplars, liquidambars, figs and fruit trees are common culprits in valley gardens. Roots can travel well beyond the canopy, so a tree on a neighbour's block or the nature strip can still affect your sewer.

Warning signs

  • toilets that gurgle or drain slowly
  • water rising in the shower when the toilet is flushed
  • the overflow gully outside wet, smelly or overflowing
  • blockages that come back at about the same time each year
  • a lush patch of lawn over the sewer line

How roots are cleared

A plumber clears roots with an electric drain machine fitted with cutting blades, a high-pressure jetter with a root-cutting nozzle, or both. The aim is to cut the roots back to the pipe wall and flush the debris away. A camera inspection afterwards shows how much root growth remains and which joints are letting roots in.

Clearing gets the drain flowing, but it does not seal the gap. Roots usually grow back, often faster than before, because cutting them encourages new growth.

Managing roots long term

Regular maintenance

Some households choose to have the line jetted every six or twelve months to keep roots under control. This works, but it is an ongoing cost.

Spot repairs

If the camera shows roots entering at one or two joints, digging up and replacing those sections with PVC pipe can solve the problem.

Relining

If roots are entering at many joints, a resin liner can be installed inside the old pipe, sealing every joint at once without digging a trench.

Full replacement

If the pipe has collapsed or sagged badly, replacing the line with PVC may be the best option.

Planting near sewers

When planting new trees, find out where your sewer runs and keep large trees well away from it. Choose smaller, less aggressive species near drains. A plumber can locate the sewer line with a camera and transmitter so you can plan your garden.

What not to do

Avoid pouring chemical root killers or harsh drain cleaners down the toilet. They can damage pipes and fittings, harm septic systems where they exist, and often do little to a well-established root mat.

If your drains are blocking more than once a year, ring 03 8658 7998 and ask for a camera inspection.

Handy guides

More guides

Burst pipe: what to do in the first ten minutesA step-by-step guide for Newborough households when a pipe bursts: shutting off water, protecting the house, what to tell your plumber and insurer.Finding your water meter, stopcock and isolation valvesWhere to find the water meter, main stopcock and isolation valves in a typical Newborough home, how to turn them off and what to do if they are stuck.Frozen pipes in a Latrobe Valley winterHow to protect pipes, taps and hot water relief lines from frost in Newborough and the Latrobe Valley, and what to do if a pipe freezes or splits.Heat pump or electric hot water in the Latrobe Valley?Comparing heat pump, electric storage and solar hot water for Newborough and Latrobe Valley homes: running costs, cold winters, space, noise and rebates.Hot water temperature rules in Victoria, explainedA plain-English guide to hot water temperature rules in Victoria: the 60 degree storage rule, the 50 degree bathroom limit, tempering valves and scald safety.Leaking tap: fix it yourself or call a plumber?How to tell what kind of tap you have, which leaks you can safely fix yourself, and when to call a Newborough plumber instead.No hot water? A quick checklist before you callSimple checks for Newborough households with no hot water: switchboard breakers, off-peak timers, relief valves, tank leaks and when to call a plumber.Plumbing in Newborough's post-war homesWhat to expect from the plumbing in Newborough's original post-war houses: clay sewers, galvanised pipe, old hot water units and what to check when buying or renovating.Stormwater after a storm: what to checkWhat to check around your Newborough home after heavy rain: gutters, downpipes, pits, pooling water and signs your stormwater system is failing.Toilet cistern faults explainedA guide to common toilet cistern faults in Newborough homes: running water, slow filling, weak flushes, leaks and how each is fixed.
Book a plumber

Send us the job details

Send the details and a licensed plumber from Newborough will call you back. Water flooding or a sewer overflowing? Do not wait for a reply, ring 03 8658 7998 now.

03 8658 7998

Every job is quoted on what we actually find. That is why you will not see a price list on this site.







    Plumbing problem in Newborough?

    Ring a local licensed plumber. You hear the price before any work starts.