Home › Burst pipe: what to do in the first ten minutes
Guide · Newborough plumbing

Burst pipe: what to do in the first ten minutes

A burst pipe is stressful, but what you do in the first few minutes makes a big difference to the damage. Here is a simple plan.

Minute one: stop the water

Go straight to the water meter. In most Newborough streets, it is at the front of the property near the boundary, either in a small box in the ground or standing up beside the fence or driveway. Turn the tap on the meter clockwise until it stops. If it is a lever, turn it so it sits across the pipe.

If the meter tap will not move, do not hit it with a hammer or force it with a long bar. You could break the meter fitting and make the leak far worse. Instead, look for an isolation valve closer to the burst, such as under a sink, behind the toilet or at the hot water unit.

Minute two: turn off the hot water

With the water off, a hot water unit can overheat or be damaged. On an electric unit, switch off the hot water circuit in your switchboard.

Minute three: think about power

If water is near power points, light fittings or appliances, switch off the power at the switchboard if you can do it without standing in water. If water is coming through a ceiling light, do not touch the switch, and keep everyone out of that room.

Minutes four to six: limit the damage

  • Move furniture, rugs, electronics and valuables out of the wet area.
  • Put down towels and buckets.
  • If water is pooling in a ceiling, there is a risk the plaster will collapse. Keep people out from underneath.
  • Open windows and doors to start drying the house.

Minutes seven to eight: take photos

Before you mop up, take photos and short videos of the damage, the burst pipe if you can see it, and any affected furniture or flooring. Your insurer will want them.

Minutes nine to ten: ring a plumber

Ring us on 03 8658 7998. Tell us:

  • where the water is coming from, if you know
  • whether you have managed to turn the water off
  • whether the hot water is off
  • whether there is water near electrics
  • the best way to get to the property

We will give you an arrival time and tell you if there is anything else you should do while you wait.

After the repair

Once the pipe is fixed and the water is back on, keep the house ventilated, run fans and, if carpets or floors are soaked, contact a water damage restoration company through your insurer. Wet plaster, carpet underlay and timber floors can grow mould within days if they are not dried properly.

Preventing the next one

  • Know where your meter and isolation valves are, and make sure they turn.
  • If you have old galvanised pipe, consider replacing it before it fails.
  • Lag exposed pipes before winter frosts.
  • Fit a pressure limiting valve if your water pressure is high.
  • Replace braided flexible hoses under sinks and toilets every ten years or so.

A few minutes of preparation now can save you a very bad morning later.

Handy guides

More guides

Finding your water meter, stopcock and isolation valvesWhere to find the water meter, main stopcock and isolation valves in a typical Newborough home, how to turn them off and what to do if they are stuck.Frozen pipes in a Latrobe Valley winterHow to protect pipes, taps and hot water relief lines from frost in Newborough and the Latrobe Valley, and what to do if a pipe freezes or splits.Heat pump or electric hot water in the Latrobe Valley?Comparing heat pump, electric storage and solar hot water for Newborough and Latrobe Valley homes: running costs, cold winters, space, noise and rebates.Hot water temperature rules in Victoria, explainedA plain-English guide to hot water temperature rules in Victoria: the 60 degree storage rule, the 50 degree bathroom limit, tempering valves and scald safety.Leaking tap: fix it yourself or call a plumber?How to tell what kind of tap you have, which leaks you can safely fix yourself, and when to call a Newborough plumber instead.No hot water? A quick checklist before you callSimple checks for Newborough households with no hot water: switchboard breakers, off-peak timers, relief valves, tank leaks and when to call a plumber.Plumbing in Newborough's post-war homesWhat to expect from the plumbing in Newborough's original post-war houses: clay sewers, galvanised pipe, old hot water units and what to check when buying or renovating.Stormwater after a storm: what to checkWhat to check around your Newborough home after heavy rain: gutters, downpipes, pits, pooling water and signs your stormwater system is failing.Toilet cistern faults explainedA guide to common toilet cistern faults in Newborough homes: running water, slow filling, weak flushes, leaks and how each is fixed.Tree roots in old clay sewersWhy tree roots get into Newborough's old clay sewer pipes, the warning signs, how roots are cleared and the options for a permanent fix.
Book a plumber

Send us the job details

Send the details and a licensed plumber from Newborough will call you back. Water flooding or a sewer overflowing? Do not wait for a reply, ring 03 8658 7998 now.

03 8658 7998

Every job is quoted on what we actually find. That is why you will not see a price list on this site.







    Plumbing problem in Newborough?

    Ring a local licensed plumber. You hear the price before any work starts.