Leaking tap: fix it yourself or call a plumber?
A dripping tap is one of the most common household annoyances. Some leaks are an easy fix, others are best left to a plumber. Here is how to tell the difference.
Identify your tap
Washer taps
Separate hot and cold taps that turn several times from off to fully on. Inside is a jumper valve with a rubber washer.
Quarter-turn ceramic taps
Separate taps that turn only a quarter or half turn. Inside is a ceramic disc cartridge.
Mixer taps
A single lever controlling both temperature and flow. Inside is a cartridge.
Leaks you might fix yourself
If you are handy and confident, you can replace the washer in a traditional washer tap:
- Turn off the water at an isolation valve or the meter.
- Open the tap to drain it.
- Remove the handle and cover, then unscrew the tap body.
- Replace the washer, or the whole jumper valve, with the correct size.
- Reassemble and turn the water back on slowly.
Cleaning a blocked aerator on the spout is also a simple job.
When to call a plumber
- The tap still drips after a new washer. The seat is probably worn and needs refacing or replacing.
- Mixer taps. Cartridges are brand-specific, and fitting the wrong one or damaging the body is easy.
- Water leaking from the base or handle. This can involve O-rings or internal seals that need the right parts.
- You cannot turn the water off. A seized meter tap or no isolation valves is a job for a plumber.
- Leaks inside the wall. Water stains, bubbling paint or damp behind a shower or bath mean the leak is behind the wall.
- Corroded or old taps. Parts may snap or strip when you try to dismantle them.
- Braided hoses under the sink. If they are old, kinked or rusty, replace them before they burst.
The risks of DIY
The biggest risks are damaging the tap body, stripping threads, and being unable to turn the water off again. A small drip can become a flood if a tap is damaged with the water still on, or a meter tap snaps.
What a plumber does
We isolate the water, identify the tap and its parts, replace worn washers, jumper valves, cartridges or O-rings, reface the seat if needed, and test the tap. We also check for isolation valves and can add them so future repairs are easier. If the tap is beyond repair, we can replace it with a new one.
How quickly should you fix a drip?
Sooner is better. Drips waste water, add to bills, stain basins and get worse over time. Hot water drips waste energy too.
Ring 03 8658 7998 if you would rather have it fixed properly the first time.
More guides
Send us the job details
Send the details and a licensed plumber from Newborough will call you back. Water flooding or a sewer overflowing? Do not wait for a reply, ring 03 8658 7998 now.
Every job is quoted on what we actually find. That is why you will not see a price list on this site.
Plumbing problem in Newborough?
Ring a local licensed plumber. You hear the price before any work starts.