
Hot Water Replacement Newborough
Tank rusted through or simply worn out? We remove the old unit, install the right replacement for your household and take the old one away. Ring 03 8658 7998.
When it is time to replace
A hot water unit does not last forever. These are the signs that a replacement is the sensible choice:
- water leaking from the tank body rather than a valve
- rusty or brown water from the hot taps
- the unit is more than about twelve years old and needs a significant repair
- you run out of hot water regularly
- loud rumbling or banging from the tank
- repeated faults in a short period
If your tank is leaking from the body, turn off the cold water valve at the unit and switch off the power. A leaking tank cannot be repaired and can fail suddenly.
Choosing the right replacement
Like-for-like is often the quickest option, but it is worth thinking about whether your current system still suits you.
Electric storage
Lower upfront cost and simple to install. Running costs are higher unless it runs on an off-peak tariff.
Heat pump
Uses a fraction of the electricity of a standard electric tank by drawing heat from the air. Popular as an upgrade from electric, and government rebates may be available.
Solar
Works well with good roof orientation and is often paired with an electric booster.
We talk through how many people are in the house, how many bathrooms you have, whether you have rooftop solar and what matters most to you, then recommend a unit and size.
What happens on installation day
- We drain and disconnect the old unit, isolating water and power safely.
- We prepare the base and connections, upgrading valves and pipework where needed.
- We install the new unit with a new relief valve, isolation valve and, where required, a tempering valve so bathroom water is delivered at a safe temperature.
- We fill and test the system, check for leaks and confirm correct temperatures.
- We remove the old unit and leave the site clean.
- We issue a compliance certificate where it is required and explain how to look after the new unit.
Most straightforward replacements are done in a few hours. A change of type, such as electric storage to heat pump, can take longer because of the new base and connections.
Same-day replacement
We keep popular sizes available through local suppliers, so many replacements can be done on the day you ring. If you need a particular model, we will give you the lead time.
Hot water replacement near Newborough
We replace hot water units in Newborough, Moe, Yallourn North, Hernes Oak, Moe South, Morwell, Traralgon, Trafalgar and Tanjil South.
Sizing a replacement for your household
Getting the size right matters more than most people realise. Too small, and the last person in the shower gets cold water. Too large, and you pay to keep water hot that you never use.
As a starting point, we look at:
- How many people live in the house and whether that is likely to change.
- How many bathrooms you have and whether showers run at the same time.
- When you use hot water. Families with teenagers who all shower in the morning need more capacity than a couple who shower at different times.
- Your appliances. Some dishwashers and washing machines use hot water from the tank.
- Your energy tariff. Off-peak electric tanks need to be larger because they only heat overnight.
For heat pumps, recovery rate matters as much as tank volume. A heat pump reheats more slowly than an element, so a busy household usually needs a slightly larger tank than the electric unit it replaces.
Moving the unit
Sometimes it makes sense to put the new unit in a different place. A tank a long way from the kitchen and bathroom could be moved closer to reduce the wait for hot water. We talk through the options and the extra work involved.
Tempering valves on replacement units
When a hot water unit is replaced in Victoria, a tempering valve is generally required so hot water to bathrooms is delivered at no more than 50 degrees. If your old system did not have one, we include it in the installation.
Planning ahead
If your unit is getting old, it is worth thinking about the replacement before it fails. That gives you time to compare types, check rebates and choose a time that suits you, rather than taking whatever is available on the day you have no hot water.
Disposal of the old unit
We take the old cylinder away with us and send it for metal recycling, so you are not left with a rusting tank beside the house.
Warranty and paperwork
Every new unit comes with the manufacturer's warranty, and we lodge the compliance certificate and give you a copy for your records and your insurer.
What you get with hot water replacement
- On the ute
- Drain camera with locator, jetter, electric eel, acoustic leak detector, thermal camera, pressure test gear
- Licensing
- Victorian licences for water supply, sanitary, drainage and roofing
- Quoting
- Cause explained and price agreed before work, written quotes for larger jobs
- Parts
- WaterMark-certified fittings and products that meet Australian Standards
- Certificates
- Compliance certificates for regulated plumbing work, photos for your records or insurer
- Leaving
- Old parts removed, the work area cleaned and everything tested with you
Hot Water Replacement in Newborough: questions
How much to install a hot water system?
It depends on the type and size of the unit and how much the connections need to change. We look at your setup and give you a firm price, including removal of the old unit, before we start.
How long does a hot water replacement take?
A like-for-like swap usually takes a few hours. Changing to a different type of system can take most of a day.
Do you take the old unit away?
Yes. Removing and disposing of the old unit is part of the job.
What size hot water unit do I need?
It depends on how many people live in the house, how many bathrooms you have and the type of system. We size it for your household so you do not run out.
Send us the job details
Send the details and a licensed plumber from Newborough will call you back. Water flooding or a sewer overflowing? Do not wait for a reply, ring 03 8658 7998 now.
Every job is quoted on what we actually find. That is why you will not see a price list on this site.
Straight answers and tidy work
Post-war SEC brick and weatherboard homes, 1970s units, new estates on the edge of Newborough and lake-side blocks: we know what is usually hiding in the walls and under the lawn.
You get the cause and the cost before work starts. If the plan changes once we open something up, we stop and talk to you first.
Drain cameras, jetters, acoustic leak detectors and thermal cameras mean we find the fault instead of guessing and digging.
Water, sanitary, drainage and roofing work done by licensed tradespeople, with the paperwork lodged where the law requires it.
Read this first
More plumbing services around Newborough
Towns we cover from Newborough
We work out of Newborough and cover the valley from Moe and Yallourn North across to Morwell and Traralgon, plus the hill blocks around Tanjil South and Moe South. Not on the list? Ring 03 8658 7998 and ask.
Plumbing problem in Newborough?
Ring a local licensed plumber. You hear the price before any work starts.